SWITCH 9P GE LAN +1P SFP TENDA TEG1110PF-8-120W 8P POE (120W)

Hardware
Standard di rete: 
- IEEE 802.3/IEEE 802.3u/IEEE 802.3ab
- IEEE 802.3x/ IEEE 802.3af/IEEE 802.3at
Indicatore LED: Power, Link/Act, PoE MAX
Interfacce: 
- 9x 1Gbe RJ45 ports
- 1x 1Gbe SFP ports
Trasmissione media: Recommended: CAT5/5e UTP or better
Quantità delle ventole: -
Dimensione: 177.5mm x 104mm x 26mm
Livello di protezione: 
- Port: 6 KV
- Power: 6 KV
Modalità di inoltro: Store-and-forward
Portata switch: 20Gbps
Velocità di inoltro dei pacchetti: 14.9Mpps
Buffer: -
Tabella degli indirizzi MAC: -
Jumbo frame: -
Budget PoE: 
- Single port: AF: 15.4W, AT: 30W
- Whole device: 92W
Consumo: 120W
Voltaggio in ingresso: 100-240V AC 50/60Hz
Montaggio: 
- Desktop mounting: support
- Wall mounting: support
Ambiente: 
- Operating Temperature: 0℃~45℃
- Storage Temperature: -40℃~70℃
- Operating Humidity: 10%~90% non-condensing
- Storage Humidity: 5%~90% non-condensing
Certificazione: FCC, CE, RoHS

Software
Funzioni
One-key to change network mode:
1. Standard: Default mode. In this mode, all ports can communicate with each other
2. VLAN: In this mode, ports 1 - 8 are isolated from each other, but all of them can communicate with port 9 and SFP1. This mode helps isolate DHCP broadcast and reduce broadcast storm.
3. Extend: In this mode, ports 1 - 8 decrease to 10 Mbps in negotiation rate, but transmit up to 250 m in distance. All ports can communicate with each other